-
Recent Posts
- It’s been a while.
- Having and issue installing pygal
- Exciting things happen in freecad Ver.17 and down the Rabbit hole we go.
- Problems Ssh’ng into my Beaglebone Black using my W530 with Nvidia drivers
- Its been a while. Playing around with screen resolution on a atrix lapdock for beaglebone black and machinekit
Recent Comments
- pepe on Trying to work on the Halloween project.
- Peter McKelvey on About
- Kevin on Part 1)Experiments on getting OpenCascade MakeBottle.cxx to compile on Hardy Heron 32-bit using g++ compiler
- admin on Getting my D&M computing sherline mill running with my Linisteppers. What PSU voltage?
- Filippo Gagliardi on Getting my D&M computing sherline mill running with my Linisteppers. What PSU voltage?
Archives
- April 2023
- November 2017
- April 2017
- March 2017
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- August 2015
- May 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- June 2014
- April 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- July 2013
- June 2013
- May 2013
- April 2013
- January 2013
- December 2012
- November 2012
- October 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- October 2011
- July 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- April 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- August 2009
- July 2009
- June 2009
- May 2009
- April 2009
- March 2009
- February 2009
- January 2009
- December 2008
- November 2008
- October 2008
- September 2008
- August 2008
- July 2008
- June 2008
- May 2008
- April 2008
- March 2008
Categories
Meta
Monthly Archives: November 2009
Repair of a push mower roller bracket using my metal shaper
This was sort of a fun project for me. I had this push mower that I had inadvertently busted the roller bracket on when I backed it up hard on my driveway I had some stock with pre drilled holes … Continue reading
Posted in Machining
Leave a comment
Scraping an Ammco metal shaper counter-shaft base
One of my projects was to replace a worn counter shaft on my ammco metal shaper replace the babbit bearing with Bronze. A friend with a jig-bore machine the counter shaft for me in his jig-bore to fit the bushings. … Continue reading
Posted in Machining
Leave a comment
More on digital photo compression on Ubuntu Linux.
Ok… I was looking over my last post and it looks like I was coming off a bad week…. This week seems better but I’ve got some things piling up on my gtd list that I’ve been wanting to get … Continue reading
Posted in Uncategorized
Leave a comment